Showing items  1 - 302  of  12
Sort:
$1.59

34mm carburetor base gasket, fits all dual port applications for pict-34. Heavy duty .50mm thickness. 

Complete cylinder head
$199.95

Brand new cylinder head complete with springs, valves, and keepers. Fits all 1600cc based applications. These dual port heads are a China made...

$1.59

Carburetor base gasket, 30mm. Fits all 28mm-30mm manifolds. Heavy duty .50mm thickness.

$759.95
Out of Stock

Universal crankcase, dual oil relief. 1300-1600 VW factory magnesium, 8mm cylinder studs.

$819.95

Universal crankcase, aluminum for 1600cc. 8mm studs. Quality casting from Auto-Linia Brasil. Great start for any 1600cc based engine.

$9.59

Main bearing dowel pin, fits all 36hp-2000cc aircooled engines. Sold in sets of five. Free shipping for a limited time to all lower 48 states!

$37.95
Out of Stock

Best stud kit on the market. Fits all 8mm case applications for dual port 1600cc based engines. 48pc kit comes complete with studs, nuts, and...

$4.59

Rubber camshaft bore end plug, fits all 1300-1600cc based engines with non grooved case.

$1.89

Camshaft end plug, fits all 1300-1600cc based engines with grooved case.

$8.99

Bronze valve guide for all 25hp-36hp cylinder heads. Replace your old worn out valve guides with these custom made guides from...

$4.99

Replacement valve guide for all 40hp-1600cc heads, single or dual port. Replace worn out valve guides in your cylinder head with brand new high...

$3.00

Cylinder head nut, 10mm thread 15mm OD. These nuts are used on all 36hp-1600 engines with 10mm studs. Sold in packs of eight. 

$4.99

Cylinder head nut, 8mm. Fits all aircooled with 8mm studs. Sold in packs of eight.

$2.59

Cylinder head washer, 10mm x 15mm. Sold in packs of eight.

$1.99

Cylinder head washer, 8mm x 15mm. sold in packs of 8.

$5.00

Valve cover for all 36hp engines to 1960. Good used cover, may have some cosmetic imperfections. Hot tanked and checked for flatness. Sold each....

$87.95

Custom vented style valve cover with 8mm vent tube. Painted low gloss black, sold in pairs with gaskets.

$12.99

Valve cover, fits all 40hp-1600cc engines.Brand new VW factory cover. Sold each

$2.39

Gasket, valve cover fits all 40hp-1600cc engines. Cork/rubber composition, excellent quality can be used with or without sealer.Sold as a pair....

$12.99

Gasket, valve cover fits all 40hp-1600cc engines. Cork/rubber composition, excellent quality can be used with or without sealer.Sold as a pack...

$3.59

Gasket, valve cover fits all 36hp 1200cc engines. Cork/rubber composition, excellent quality can be used with or without sealer.Sold as a pair.

$14.99

Gasket, valve cover fits all 36hp 1200cc engines. Cork/rubber composition, excellent quality can be used with or without sealer.Sold as a ten pack...

$219.95

Precision ground stock crankshaft for all 25hp-36hp engines. Harmoniclly balanced, micro polished. Sold outright, no core!

$129.99

Precision reground crankshaft for all 40hp engines. Harmonically balanced and micro polished. Sold outright,no core!

$97.95

Cross drilled 13-1600cc crankshaft, O-ring stlye. Precision reground, harmonically balanced and micro polished. Fits all type 1, 2, and 3. Sold...

$124.99

Brand new std/std crankshaft, fits all 13-1600cc applications.

$13.95

Upper balljoint for all type one through 1978 except super beetle. 

$0.99

Woodruff key for end of crankshaft/pully. Fits all aircooled engines.

$13.95

Lower balljoint for all type 1 except super beetle.

$18.95

Cam timing gear, new. Fits all 40hp-1600cc.

$6.95

Distributor drive gear, all 25hp-1600cc engines, used VW factory original.

$4.99

Distributor drive pinion gear, 40hp-1600cc, used German factory.

$1.50

Distributor drive gear spacer, fits all aircooled engines. Sold in a packs of two.

$2.59

Crankshaft oil deflector plate, or "slinger". Fits all 40hp-1600cc engines, used VW factory.

$7.99

German silicone flywheel seal. 70mm x 90mm x 10mm. Fits all 40hp-1600cc engines.

$1.99

Crankshaft woodruff key,large. Fits in crankshaft under timing gear and spacer. Fits all 40hp-1600cc engines.

$59.95

Flywheel, 200mm clutch, 12 volt 130 tooth ring gear o-ring hub. Reground factory flywheel, sold outright.

$79.95

New flywheel, 12volt 200mm clutch, o-ring style.

$0.79

8mm dowel pin fits all 40hp-1600cc engines.

$1.59

O-ring, fits all O-ring style flywheels 40hp-1600cc

$1.99

Gland nut lock washer, fits all 36hp-1600cc engines.

$19.95

Gland nut, fits all 25hp-36hp applications

$15.95

Gland nut, fits all 40hp-1600cc applications except autostick and type III automatic. Brand new German.

$179.95

Excellent quality rebuilt connecting rod set, fits all 25hp-36hp engines. Resized and rebushed to factory spec. Shotpeened and balanced in sets of...

40hp balanced rods
$89.95

High quality remanufactured connecting rods for all 40hp engines. Balanced in sets of four. Sold outright, no core charge.

$109.95

Connecting rod set, all 1600cc engines. Balanced in sets of four. Sold outright, no core charge.

$59.95

New std rod bearings fits all 25hp-36hp engines. Sold as a set (8 bearing shells)

$16.95

Standard rod bearing set fits all 40hp-1600cc engines. Sold as a set. (8 bearing shells)

$49.95

Rod bearing set for 25hp-36hp engines, .025. Sold per set (8 bearing shells)

$14.95

Rod bearing set for 40hp-1600cc engines, .025. Sold per set (8 bearing shells)

$49.95

Rod bearing set for 25hp-36hp engines, .050. Sold per set (8 bearing shells)

$15.95

Rod bearing set for 40hp-1600cc engines, .050. Sold per set (8 bearing shells)

$24.95

Rod bearing set for 25hp-36hp engines, .075. Sold per set (8 bearing shells)

$16.95

Rod bearing set for 25hp-36hp engines, .025. Sold per set (8 bearing shells)

$109.95

Excellent quality reground camshaft, fits all 25hp-36hp engines. Reground to factory lift specifications then parkerized on lobe surfaces. Cam is...

$79.99

Brand new camshaft, 3 rivet flat cam gear. Fits all 40hp-1600cc engines.

$89.95

VW OEM camshaft, factory grind. Regrind 4 rivet dished cam for all 71-later 1600cc engines. Sold outright, no core.

$13.95

German cam follower with pushrod , fits all 25hp-36hp engines. For sale each or can be ordered in sets of eight.

$1.99

Stock length pushrod for all 65-79 1300cc/1600cc engines. Good used factory original

$57.99

Camfollower, all 40hp-1600cc engines. Sold in sets of eight

$4.99

Pushrod tube, fits all 25hp-36hp engines.

$2.50

Pushrod tube, fits all 40hp 1200cc engines.

$2.99

Pushrod tube, fits all 1600cc engines.

$0.45

Pushrod tube seal, fits all 40hp-1600cc engines. German silicone.

$11.95

Intake valve,30mm fits all 36hp

$19.95

Intake valve for all 36hp applications with 33mm valves and Okrasa heads.

$10.95

Intake valve, all 1300cc engines and type I fuel injected heads.

$8.95

Intake valve, all 1600cc engines.

$12.95

Exhaust valve, all 36hp engines.

$12.95

Exhaust valve, 30mm fits all 40hp-1300cc engines.

$13.95

Exhaust valve, 32mm fits all 1500cc-1600cc engines.

$59.99

Brand new valve spring for all 36hp engines. Heavy duty application, works on stock and performance engines. Sold in sets of eight

$2.99

Valve spring, brand new. Fits all 40hp-1600cc engines.

$39.95

Oil pump, heavy duty fits all 1300cc-1600cc single relief cases with 8mm mounting holes. 26mm gears

$39.95

Heavy duty oil pump fits all 1600cc dual relief cases, 8mm mounting holes. 26mm gears.

$39.95

Oil pump fits all 1600cc engines with dual relief case and late model 4 rivet dished cam. 26mm gears.

$39.95

Oil pump, 30mm gear housing. Fits all 1600cc applications with 4 rivet cam.

$79.95

Oil pump , 6mm holes in pump housing. Fits all 36hp-1600cc with 6mm case studs.

$8.99

Factory VW logo oil pump cover. These are used covers that have been remachined to factory specs. Fits all engines with 6mm oil pump studs.

$8.99

Factory VW logo oil pump cover. These are used covers that have been remachined to factory specs. Fits all engines with 8mm oil pump studs.

$6.99

Oil sump screen , fits all 25hp-36hp engines.

$3.99

Oil sump screen, all 40hp and 1600cc engines.

$5.99

Oil sump plate fits all 40hp-1600cc engines.

$3.99

Oil sump gasket, fits all 25hp-36hp engines, sold as a pair.

$3.99

Oil sump gasket set, contains two gaskets, one sump o ring and six sump nut crush rings. Fits all 40hp-1600cc engines.

$0.99

Gasket, cork fits all 25hp-1600cc upright engines.

$1.59

Used factory dipstick, fits all 25hp-1600cc engines.

$37.95

Valve adjusting screw, 8mm x 1.0mm. Sold in sets of eight, good quality German with hardened tip.
 

$12.95

Exhaust valve, 28.6mm fits all 36hp engines.

$22.95

Cooling fan, fits all years 60 to 70 with non doghouse fan shroud.

$24.95

Cooling fan fits all type 1 and 2 with late model offset oil cooler.

$89.95
Out of Stock

Quality rebuilt 36hp fuel pump. Fits all 1200cc 36hp to 1960.

$27.95

Fuel pump, fits all 40hp-1600cc engines with generator.

$54.95

Fuel pump fits all 40hp-1600cc bus and beetle engines with threaded fitting, Danish made.

$27.95

Fuel pump fits all 40hp-1600cc applications with alternator.

$24.95

Bakelite fuel pump flange fits all 36hp engines. Good used factory part, cleaned and ready for use.

$6.99

Fuel pump flange, fits all 40hp-1600cc engines.

$3.99

Fuel pump pushrod fits all 40hp-1600cc non-alternator applications.

$10.95

Fuel pump pushrod, fits all 36hp engines, used VW factory part.

$8.95

Fuel pump pushrod, fits all 40hp-1600cc applications with alternator.

$0.99

Fuel pump flange gasket set. One top and one bottom gasket.

$9.95

Fuel hardline from firewall to pump, all 40hp-1600cc to 1974 without fittings.

New 30mm VW carb
$124.95

30mm round bowl carburetor, brand new. Fits all 28mm-30mm flange manifolds, 40hp-1600cc. 12volt choke.

$174.95

H 30/31 Brosol square bowl carburetor, fits all 28mm-30mm intake manifold flanges. Comes conversion with adapter for 34mm flanged intakes.

$169.95

34mm brand new carburetor. Fits all 1600cc applications with 34mm flange manifold.

$0.99

Intake gasket, fits all dual port engines goes between manifold and cylinder head. Heavy duty .50mm paper cut oversized to fit all stock and...

$0.59

Stock metal dual port intake manifld gasket, fits all carbureted engines.

$2.99

Red silicone intake boot, fits all dul port applications.

$0.99

Barrel nut for all throttle and heater boxes 64-on. Type 1, 2, and 3.

$0.99

Throttle return spring, fits all 28pict - 34pict carburetors equipped with a return spring.

$2.99

Throttle cable guide tube, fits all 40hp - 1600cc engines.

$0.99

Inner o-ring seal for fuel injection on all type 1, 2, 3, and 4.

$3.99

Outer o - ring seal for all type 1, 2, 3, and 4 with fuel injection.

$59.95

180mm clutch cover, diaphram style. Fits all 36hp - 40hp 180mm flywheels. 1500 pound rating.

$69.95

Clutch cover, 200mm diaphram style. Fits all 200mm applications, 1500 pound rated.

$39.95

Clutch disc, 180mm. Fits all 180mm flywheels.

$39.95

200mm clutch disc, rigid non sprung.

$39.95

200mm clutch disc, spring type center. Fits all 200mm flywheels.

$39.95

Clutch release bearing, all type 1, 2, and 3 to 1970.

$39.95

Clutch release bearing, fits all type 1, 2, and 3 1971 and later.

$0.99

Clutch release bearing retaining spring, fits release bearing 111141165a to 1970. Pack of two.

$22.95

Complete gasket set, all 36hp 1200cc engines.

$13.95

Engine gasket set, fits all 40hp engines.

$21.95

Engine gasket set, all 1600cc engines. Elring

$12.95

Bushing repair kit for clutch operating shaft 8/60-7/70. Solid bronze bushing style.

$1.99

8mm to 10mm oil cooler conversion seals. Used when converting to later 10mm on an 8mm case.

$1.99

Sump gasket kit, fits all 40hp-1600cc engines. Good quality German.

$249.95

Stock 77mm piston and cylinder kit fits all 1200cc 36hp engines. Good quality kit from AA performance.

$169.95

Piston and cylinder set, stock 77mm for all 40hp engines. Good quality pistons from AA performance.

$195.95

Piston and cylinder set, 83mm big bore for all 40hp. Good quality set from AA performance. Complete set of four with pistons, cylinders, rings,...

$154.95

85.5 piston/cylinder set for all 1600cc engines. Good quality AA performance P/C set. Shipping is FREE to all continental USA locations.

$164.95

Bolt on performance for a 1600cc engine. Increases displacement to 1641cc. Good quality P/C set made by AA performance. Kit includes four pistons...

$179.95

90.5 big bore P/C set. increasess displacement to 1776cc. Requires machining of case and heads to fit barrel diameter. Kit includes four pistons,...

$189.95

90.5 big bore P/C set for 82mm stroke,or "B" pistons. Requires machining of case and heads to fit barrel diameter. Kit includes four...

$24.95

Piston ring set fits all 36hp and 40hp 1200cc engines. 2.5 x 2.5 x 4mm ring width. Complete set  for all four pistons.

$29.95

Piston ring set, all 1300cc 77mm pistons only. 2 x 2 x 4mm ring size. German

$27.95

Piston ring set, big bore 83mm 40hp. 1.5 x 1.5 x 4mm ring size.

$29.95

Piston ring set, big bore 83mm 40hp. 2 x 2 x 4mm ring size.

$28.95

Piston ring set, big bore 87mm.

$28.95

Piston ring set, big bore 90.5mm. 1.5 x 1.5 x 4mm ring size.

$24.95

Piston ring set 85.5mm for 1600cc engines. 2 x 2 x 5mm ring width. USA made.

$89.95

Std case, std crank main bearing set for all 25hp - 36hp engines.

$89.95

Std case, .025 OS crank main bearing set for all 25hp - 36hp engines.

$89.95

Std case, .050 OS crank main bearing set for all 25hp - 36hp engines.

$39.95

Std case, std crank main bearing set for all 1600cc engines.

$39.95

Std case, .010 OS crank main bearing set for all 40hp - 1600cc engines.

$39.95

Std case, .020 OS crank main bearing set for all 40hp - 1600cc engines.

$39.95

.020 case, .std crank, .040 OS thrust main bearing set for all 40hp - 1600cc engines.

$39.95

.020 case, .010 crank, .040 OS thrust main bearing set for all 40hp - 1600cc engines.

$39.95

.020 case, .020 crank with .040 thurst main bearing set for all 40hp - 1600cc engines.

$39.95

.040 case, std crank with .040 thurst main bearing set for all 40hp - 1600cc engines.

$39.95

.040 case, .010 crank with .040 thurst main bearing set for all 40hp - 1600cc engines.

$39.95

.040 case, .020 crank with .040 thurst main bearing set for all 40hp - 1600cc engines.

$17.95

Camshaft bearing set, fits all 40hp - 1600cc cases cut with cam bearings.

$18.95

Cam bearing set HD double thrust flange for all 40hp - 1600cc cases cut for cam bearings.

$21.95

Universal caruretor kit. Fits 28pict - 34pict 1 and 2. 

Early VW carburetor kit
$19.95

Carburetor rebuild kit for all 28PCI carburetors to 1960.

$18.95

Engine mount, support bar to body, type 2 8/67 - 7/71.

$16.95

Engine mount, engine carrier to body all type 2 8/71 - 7/79

$69.95

Reserve fuel tap all beetle to 1961. All std beetle to 1964.

$74.95

Reserve fuel tap all type 2 bus. German made.

$4.99

Fuel tap screen, all aircooled VW except fuel injected.

$259.95

Brand new Danish muffler, all beetle to 1960 with 36hp engine.

$89.95

40hp dual tip fresh air muffler, Mexico or Brazil.

$109.95

Dual tip muffler for all 1600cc applications, German.

$163.95

Type 2 bus muffler, fits all bus to 1971 with 1600cc engine. German.

$25.95

Damper pipe for all type 2 bus to 1971.

$11.95

Type 2 tailpipe, fits resonator 147251157. All bus to 1967.

$11.95

Type 2 tailpipe, fits resonator 147251157. All bus to 1968 - 7/70.

$0.99

Cylinder head exhaust flange gasket for all 25hp - 1600cc engines. Comes four to a package.

$0.79

Preheat tube gasket for all single heat riser applications. Two per package.

$4.99

Heat riser gasket for 74 only dual heatriser manifolds. Sold per pair, German.

$7.99

Damper pipe bracket Type 2 bus to 1971. Fits damper #147251157.

$2.99

Clamp for all damper pipes for type 2 bus to 1971.

$15.95

225mm tail pipe, chrome with baffle. Fits all dual tip mufflers. Sold per pair.

$6.99

Weld in repair pipe for all heater boxes. Sold in pairs.

$2.99

Connecting pipe, heater hose to muffler, all fresh air to 1975.

$9.99

Heater hose, 50mm x 1000mm length. Excellent quality German hose, cut to fit.

$11.99

Plastic heater hose, 50mm x 250mm for type 1 and 2. Two to a package.

$2.99

Band clamp for air box to heater box, all type 1 and 2 with frsh air.

$12.95

25mm x 900mm preheat hose fits all type 1 and 2 up to 1967.

$1.99

Universal fuel filter, fits all aircooled VW to 1975. WK 3 1/2, made by MANN.

$14.95

Muffler installation kit, all 40hp - 1600cc engines, type 1 and 2. Free shipping to all lower 48 states!

$4.99

Tail pipe mounting kit. Includes clamp, 6mm nuts and bolts, exhaust ring with backing ring. Good quality USA made. 

$6.99

New fuel tank nipple kit for all type 1, 2, and Ghia to 1975.

$3.00

6 volt starter bushing, fits all 6 volt starters and 6 volt transmission cases.

$2.99

Starter bushing for all 12volt starters/transmission cases.

$6.95

Starter bushing converts a 6 volt transmission case to 12 volt starter drive. Custom machined out of  oil-lite bronze for long life.

$6.99

Rear transmission saddle mount, all aircooled VW to 1972. Excellent quality VW factory.......the very best!

$16.95

Rubber transmission mount, left side for all type 1 from 8/1972.

$16.95

Transmission mount, right side. All type 1 from 8/1972.

$22.95

Upgrage or repair any torsion houseing with a broken or missing front transmission mount bracket. Allows the use on 65 - 72 front transmission...

$19.95

Front transmission mount, all type one and Ghia to 1959 with splitcase 309 transmission.

$19.95

Front transmission mount for all bus with 311 transmission,1962 - 1967.

$19.95

Front transmission mount, all Beetle and Ghia 1961 to 64

$19.95

Front transmission mount, all Beetle  and Ghia 1965 - 72.

$19.95

Front transmission mount, all Beetle and Ghia 1972 - on.

$1.99

Mainshaft seal for all type 1, 2, and 3.

$13.95

Transmission gasket set  for all 311 transmissions.

$200.00

Stock axle beam, fits all link pin applications thru - 1965. Good used original bare beam.

$259.95

Brand new bare king and link axle beam with ratchet style adjusters. Fits all king and link applications.

$189.95

Stock ball joint axle beam, bare brand new. Fits all std beetle 1965 and later.

$279.95

Brand new bare balljoint axle beam with avis style adjusters. Fit all std beetle 1965 - on.

$4.99

Torsion arm seal for all link pin axle beams. Sold in sets of 4 seals.

$3.99

Lower torsion arm seal, all ball joint axle beams. Sold per pair.

$3.99

Upper torsion arm seal, all balljoint axle beams. Sold per pair.

$29.95

Good used factory spindle, hot tanked and cleaned, right hand side.

$29.95

Good used factory spindle, hot tanked and cleaned, left hand side.

$159.95

Excellent quality 2 1/2" drop spindle, sold as a pair. For all king and link applications.

$29.95

Used factory balljoint spindles, fits all standard beetle balljoint application. Hot tanked and inpected to make sure they are straight. Sold as a...

$159.95

Forged balljoint 2 1/2" drop spindles for drum brake applications.Excellent quality spindles, these are the only forged drop spindles on the...

$44.95

Balljoint for all type 2 68 - 79. Fits upper and lower.

$52.95

Front 4 lug brake drum for all standard beetle to 1978.

$59.95

Front brake drum for link pin spindles to 1965, 5 lug.

$52.95

Front 4 lug drum for all super beetle.

$59.95

Front brake drum, all beetle 1965 to 1967, 5 lug

$11.95

Inner taper roller bearing and race for all type 2 8/1963-on.

$11.95

Front inner taper roller bearing and race for all type 1 and 3 8/1965 to 1968.

$11.95

Front inner wheel bearing for all type 1 standard and super beetle,type 3 and 4. Rear Rabbit, Scirocco, Fox, Dasher, Audi Quantum and 4000/5000...

$18.95

Inner taper roller bearing and race fits all link pin beetle spindles, also fits type 2 outer to 7/1963.

$19.95

Inner taper wheel bearing and race for all bus to 7/1963

$4.99

Front wheel oil seal for all  type 1 beetle to 1965

$4.99

Front wheel oil seal for all type 1 8/1965 to 7/1968

$4.99

Front wheel oil seal for all type 1 and super beetle 1968-on.

$5.99

Front wheel oil seal fits all type 2 to 1963

$5.99

Front wheel oil seal for all type 2 8/1963 to 7/1967

$5.99

Front wheel oil seal, all type 2 8/1967 to 1978.

$6.99

Front wheel oil seal, all type 3 1968-on.

$12.95

Outer wheel bearing, 45mm. Type 2 63 -78, rear axle outer Audi 5000.

$7.99

Outer front wheel bearing all type 1, 3, and 4 8/65-on. Outer rear wheel bearing for rabbit , dasher, fox and 100ls Audi. 

$16.95

Taper roller bearing, outer for all type 1 to 8/65. Converts ball bearing to taper roller bearing. Race included with bearing.

$1.99

Lock plate for steering knuckle nut. Type 1 thru 65, type 2 64-67, sold as a pair.

$6.99

Gasket set for all rear wheel flanges, type 1, 2, and 3. Kit includes two high quality paper gaskets, one large o-ring, one small o-ring, German...

$52.95

Four lug brake drum fits all type 1 standard beetle and super beetle.

$59.95

Front king pin set comes complete with bushings, pins, and plates, German. Sold as a kit.

$49.95

Link pin set, fits all beetle front king and link suspension. Sold as a complete kit. 

Complete 180mm VW clutch kit
$89.95

Excellent quality 180mm clutch kit for the budget minded. OE brand, comes complete with pressure plate, disc, and release bearing.

$89.95

Complete clutch kit, 200mm, excellent quality for the budget minded. OE brand 200mm clutch kit fits all 200mm applications to 1971. Comes complete...

German pully
$22.95

Excellent quality German 12 volt generator/alternator pully.

$10.95

12 volt generator belt, German Conti.

$1.99

Front axle bearing lock plate, type 2 thru 1963. Sold each.

$3.99

Wheel bearing grease cap with speedometer hole, all type 1 and type 3 disc and drum brake.

$2.99

Wheel bearing grease cap, all type 1 and type 3 disc and drum brake.

$33.95
Out of Stock

Front brake disc, all type 3 and Karman ghia. Fits all aircooled disc brake spindles.

$11.95

Track arm bushing for lower control arm, all Super beetle 70-72

$12.95

Lower control arm bushing, fits all Super beetle 74-on

$28.85

Super beetle ball joint, left or right fits all super beetle to 1973. Sold each.

$28.95

Lower balljoint, left or right, all Super beetle 74-on

$59.95

Front axle beam torsion leaves for king/link axle beam. Sold per set, two sets required.

$59.95

Torsion spring leaves for all balljoint front axle beams.  Sold per set,  two sets required per axle beam.

$47.95

Front strut insert left of right, Super beetle 70-73. KYB low pressure gas. Sold each, two required.

$39.95

Front strut cartridge, fits left or right Super beetle 74-75. KYB low pressure cartridge.   Sold each, two per car.

$38.95

Front strut cartridge, fits left or right Super beetle 75-79. KYB low pressure cartridge.   Sold each, two per car.

$79.95

Good quality clutch kit, OEM brand. Comes with pressure plate, rigid disc, and release bearing.

$169.95

69mm cast counterweighted crank. Excellent quality  crank shaft for the budget minded. In stock, ready to ship.

$15.96

Rubber stop for all Super beetle front struts 71-73

$15.95

Rubber stop for all Super beetle front struts 74-79

$24.95

KYB low pressure gas shock, fits all balljoint non lowered standard beetle.

$24.95

Front shock absorber, low pressure KYB fits all king and link non lowered front suspension to 65, all bus front to 67.

$29.95

Front shock, KYB low pressure gas. Fits all bus front 68-79.

$150.00

Upper and lower control arm kit, all balljoint beetle. For one price you get four brand new balljoints pressed into cleaned and painted factory...

$269.95
Out of Stock

83mm big bore kit made by CIMA Mahle for all 40hp engines. Kit includes four pistons, pins, clips, rings and barrels. Please be aware that some 40...

$204.95

Very nice quality vintage look roof rack. This is a knock down version, can be shipped anywhere in the continental USA for about $0. That's...

Runs great on any 36hp to 1600cc, LIMITED STOCK!!
$144.95

ON SALE!! I have a limited supply of 30mm manual choke carburetors in stock that I can sell at the low price of $144.95. These are a great...

$69.95

36hp deep sump adapter. This adapter allows the use of most 1600 engine deep sumps to be used on a 36hp engine. Adapter can be removed from sump...

$32.95

Gauze filter element, enclosed cone style. This is a washable element and can be oiled like a K&N filter. Fits all stock 28mm - 34mm...

$3.99

Pushrod, brand new fits 1300-1600cc engines. Stock length,sold each.

$54.95
Out of Stock

Inexpensive alternative to stock tail light assemblys on 73- later beetle and thing. Has a modern look and is more visible. Sold as a pair.

$78.95

This kit consists of four brake shoes, two Varga/TRW  wheel cylinders, and two German brake hoses. Purchased as a kit,  you save 15%...

German brake hose,480mm
$16.95

Front brake hose, 480mm, fits all type 1 to 1964. Quality German hose

$16.95

Front brake hose fits all type 1 1965 to 1979 standard beetle. Quality German hose.

$16.95

Rear brake hose, fits all swing axle appplications type 1, 2, and 3. Quality German brake hose.

$17.95

Front wheel cylinder type 1 1958 to 64. Left or right. Quality TRW/VARGA

65-79 standard beetle
$16.95

Front wheel cylinder, all type 1 standard beetle to 1979. Quality TRW/VARGA wheel cylinder,left or right.

$27.95

Tired of looking for a good bypass/pressure relief  plunger and springs for your new engine build? Look no further. This kit is made in the...

$18.95

Tired of looking for a good bypass/pressure relief  plunger and spring for your new engine build? Look no further. This kit is made in the...

$97.95

This car cove fits all years VW beetle. The construction of the cover is such that it has a soft inner lining to protect your paint but it has...

$159.95

Big bore piston and cylinder set, 92mm bore, stock 69mm stroke. Makes your 1600cc engine an 1835cc. Machineing of the case and heads required....

$89.95

Brand new alternator, 55 amp. Fits all type 1, 2. and Karmann Ghia. Internally regulated.

75 amp
$119.95

Brand new alternator, 75amp. Same alternator as 55amp unit, just higher amp rating. Internally regulated.

$49.95

Wicker/Bamboo parcel tray. Fits all standard beetle. This tray mounts under the dash to give you extra storage for CDs, cell phone, etc. Easy...

HP tube set complete with seals
$33.95

These pushrod tubes fit all 1600cc based engines. They feature a unique combo of both windage tube (just like Porsche) and a large mouth on the...

$53.95

Brand new stock 1600 late model oil cooler. Fits all type 1 8/70 to 7/79 and all type 2 8/70 to 7/71. Comes complete with (4) German seals....

$79.95

Brand new SVDA distributor, good quality reproduction of an original Bosch unit which is NLA. Comes complete with points, cap, and rotor.

$21.95

New German plug wire sets. For a good quality plug wire set this is by far my best seller. Nice, soft, flexible wire coating allows for easy...

$79.95

Brand new 12 volt starter, made in China. These starters are lightweight and produce high torque. No core charge, sold outright. Fits all type 1,2...

$136.95

Brand new SVDA distributor, good quality reproduction of an original Bosch unit which is NLA. Comes complete with electronic ignition module, cap...

$42.95

Reproduction 009 centrifical advance distributor. Fits all aircooled VW engines. Comes complete with points, cap, rotor. Ready to install.

$115.95

Brand new Bosch 12 volt starter, the very best. Fits all 12 volt type 1, 2 (to 71) type 3 and Ghia. No core needed.

$27.95

Heavy duty Kush lock disc works on all 200mm applications. Solid hub insures perfect power transfer to transmission.

Perfect fit!
$94.95

This is a custom dual tip exhaust system that combines a tuned header with a welded muffler and dual chrome tips. Fit and finish is excellent,...

$73.95

If you actually drive your car in a dirty environment, these are the mats for you. Nice thick rubber, will take years of abuse and hose offs....

$16.95

I've always had a morbid curiosity about car crashes since my early days as a tow truck driver for a local wrecking yard. It always seemed...

$189.95

EMPI complete steering wheel kit. 23mm grip, high gloss finish. Kit comes complete with steering wheel adapter, horn button and all mounting...

$89.95

Dual purpose oil filler and breather box. Made of cast aluminum, box has internal baffles to seperate the oil and air. Mounts to alternator/...

$54.95

Front disc brake rotor. Fits all Type 1, Type 3 and Ghia with disc brakes. Made by TRW/Varga Brazil

$44.95

Universal Brake caliper, fits type 1,type 3 and Ghia. Dual bleeder, fits left or right. Comes fully loaded with new pads.

$79.95

This 12v inline fuel pump provides a quiet 30 gph fuel flow at 2-4 psi and requires no pressure regulator. 5/16 inlet and outlest. Fuel filter and...

$59.95

Quality VARGA OEM Replacment Master Cylinder for Type 2 Bus to 1966. Works great for all buses and all dune buggy applications, 22mm bore. Free...

$59.95

Finally, some stainless steel pushrod tubes for 36hp. These would be great for any corrosive environment (like the Bonneville salt flats). These...

$59.95

Finally, some stainless steel pushrod tubes for 40hp. These would be great for any corrosive environment (like the Bonneville salt flats). These...

$14.95

Good quality 8mm silicone plug wire set for all 36hp-1600cc aircooled VW engines. Limited time offer, when they are gone, they are gone. Free...